Skip to product information
1 of 4

Soler Palau-USA

STXB Soler Palau-USA Upblast Belt Drive Centrifugal Roof/sidewall Exhaust Fans Designed To Exhaust Air Up To 37,290 Cfm In High Static Pressure Applications To 3"

Regular price $861.60 USD
Regular price Sale price $861.60 USD
Sale Sold out

STXB and STXB-RHUL Upblast Belt Drive Centrifugal Roof/Sidewall Exhaust Fans are designed to exhaust air up to 37,290 CFM in high static pressure applications to 3". The aluminum exterior provides an attractive appearance. Belt drive results in lower operating RPM and sound levels, making the Series STXB well suited to applications where quiet operation is important. Belt drive also permits easy performance adjustments when needed to balance the total ventilation system. The non-overloading backward inclined wheel with its higher static pressure capability makes this unit suitable for either ducted or non-ducted applications. Its roof or sidewall mounting options permit location near the area to be ventilated, allowing short duct runs and more efficient operation.

Isolation of motor and drive components from the air stream and, the high-velocity vertical air discharge make the Series STXB ideally suited for the removal of dirty, contaminated and/or high-temperature air from processes and buildings. Typical applications include restaurant hoods and similar kitchen exhaust ventilation, fume and smoke removal, laboratory fume hood exhaust and chemical process exhaust.

For grease removal applications the fan must be installed per NFPA 96 and with a 40" discharge height and hinged access base.


Select S-Series (Centrifugal Roof Fans) models are now hurricane and high wind certified for wind-borne debris impact resistance and wind load design pressures up to ±150 PSF.


Exhaust air up to 37,920 CFM in high static pressure applications up to 3" w.g.
Attractive spun aluminum exterior
Belt drives permit easy performance adjustments when needed
Curved non-overloading backward inclined wheel for efficiency at higher static pressures
Roof or sidewall mounting options
AMCA Air and Sound Licensed
cULus 705 and 762 Listed
Miami-Dade NOA and Florida Product Approval Option Available
Listed with the Texas Department of Insurance under Product Evaluation RV-126 for wind load and windborne debris resistance per IRC/IBC 2018
General/Clean Air
Restaurant Hoods/Kitchen Ventilation
Fume and Smoke Removal
Laboratory Fume Hoods
Chemical Process Exhaust]


Sizes: 8, 10, 12 ,14, 15 ,16, 18 , 20 , 22, 24 , 27 , 30 , 33, 36, 42, 48
Standard Accessories : Aluminum Grease Trough, Automatic Belt Tensioner, Automatic Damper (Excludes STXB-RHUL), Backdraft Damper (Excludes STXB-RHUL), Curb Cap Adaptor, Curb Hinge Arrangement, Ecowatt® Drive, Grease Grabber, Insect Screen (Excludes STXB-RHUL), Motor Operated Damper (Excludes STXB-RHUL) , Roof Curb (Excludes STXB-RHUL), Self-Flashing Curb (Excludes STXB-RHUL), Self-Flashing Restaurant Curb (For STXB-RHUL only), Ventilation Gas Detectors, Wall Mounting Kit and Wheel Cleaning Port


Product Line Overview,
Quickship Brochure,
Centrifugal Roof and Sidewall Catalog,
Typical Specification Sheet,