Plastec Ventilation
S12SS4P033WH3 Plastec Ventilation Duct Fans Polypropylene Blowers | Single 115/230V
Couldn't load pickup availability

Share
How to Choose a Fan Model-Pole
Steps and Basic Requirements:
- Phase - single or three
- Static Pressure in In WG (inches of water)
- Flow in CFM (Cubic Feet Per Minute)
1. Static Pressure: Locate the required or estimated static pressure in InWG (Inches of Water) on the selected series performance chart. If none has been specified it is always a good rule to use a minimum of 0.25
2. Flow: Find the desired flow rate in CFM (Cubic Feet per Minute) on the selected series performance chart. Note: For balancing, use a damper for single-phase, and a damper or VFD for three-phase
3. Locate the Fan Model: The model is listed in bold above the performance curve line where the static pressure and flow rate intersect.
Example: Static Pressure of 1.5 InWG and a Flow of 300 CFM is MODEL = P15-2
Features
Features
Available in single phase and 3 phase motors
This efficiently packaged all-polypropylene construction provides maximum protection against acids and corrosion.
Hindered-Amine Light Stabilizers (HALS) for increase UV resistance.
Specifications
Specifications
Model-Pole: Storm 12-4
Static Pressure Range: 0.75 to 4.5 WG
Flow Range: 30 to 350 CFM
VFD Motors Option: Yes
Mounting Kit: Weather Hood with Stand
Phase and Voltage: Single 115/230V
Inlet Diameter: 3.5"
Exhaust Diameter: 3.5”
Documentation
Documentation
Specs Sheet, https://cdn.shopify.com/s/files/1/2778/3864/files/STORM12.pdf?v=1647972928




