Skip to product information
1 of 4

Soler Palau-USA

PV-DEDPV Soler Palau-USA Dryer Exhaust Duct Power Ventilator Used For Residential Clothes Dryers Overcome The High Static Pressure Caused By Long Duct Runs Between The Dryer And Wall Or Roof Cap- 120V / 60Hz/ 2880RPM

Regular price $507.00 USD
Regular price Sale price $507.00 USD
Sale Sold out

The PV-DEDPV is a cULus 705 listed Dryer Exhaust Duct Power Ventilator. It effectively helps residential clothes dryers overcome the high static pressure caused by long duct runs between the dryer and wall or roof cap.

As laundry rooms move to more centralized locations in the home, longer and more complicated dryer duct runs are needed. These long runs cause an increase in static pressure that the integral clothes dryer fan cannot overcome. The International Mechanical Code (IMC) limits duct runs to 35 feet or less unless an engineering judgement can be made allowing a longer run. The long duct runs can cause a fire hazard because the clothes dryer fan cannot overcome the static pressure. This means the airflow is reduced causing longer drying times and more lint buildup in the ductwork. High temperatures and lint buildup are of serious safety concern in the dryer system.

The PV-DEDPV is an inline fan installed in clothes dryer systems to increase safety and allows architects/designers to locate the laundry room interior to the dwelling (instead of limiting them to only exterior walls) and still meet the  International Mechanical Code (IMC). This can be very helpful in multifamily applications where "interior units" can be sandwiched between other units creating long duct runs.

Features

cULus 705 safety listed Dryer Exhaust Duct Power Ventilator for use with Gas or Electric clothes dryers
Complies with IRC and IMC codes
Automatic operation with an integral pressure sensor
6' power cord
LED indicator light panel for operation status
Quick connect duct clamps and duct sections for easy maintenance
Backward inclined centrifugal impeller for high static pressure capability
Extend dryer duct length up to 120 feet
High-temperature thermal fuse for safety
Class F insulation
IP44 Motor protection

Specifications

Duct (in): 4
Airflow (CFM) @ Static Pressure (in w.g.) : 0.20 , 130
Frequency (Hz): 60
Voltage : 120
Max Power: 84
Max Current: 0.7
Nominal Speed (RPM) : 2880

Documentation

Product Line Overview,https://cdn.shopify.com/s/files/1/2778/3864/files/Product-Line-Overview_13.pdf?v=1655100933
Flyer,https://cdn.shopify.com/s/files/1/2778/3864/files/PVDEDPV_Flyer.pdf?v=1655100932
Typical Specification Sheet,https://cdn.shopify.com/s/files/1/2778/3864/files/PVDEDPV.pdf?v=1655100934
Submittal,https://cdn.shopify.com/s/files/1/2778/3864/files/sub-pvdedpv.pdf?v=1655100932
IOM,https://cdn.shopify.com/s/files/1/2778/3864/files/iom-pvdedpv_1.pdf?v=1655100932