Skip to product information
1 of 5

Plastec Ventilation

S14 Plastec Ventilation Storm 14 High Static Pressure Direct Drive Forward Curve Polypropylene Blower, Designed To Exhaust Gases From Corrosive Environments - Phase and Voltage: Single 115/230V & Three 230/460V

Regular price $1,593.00 USD
Regular price Sale price $1,593.00 USD
Sale Sold out
Phase
Model-Pole
Mounting Kit

Storm 14 High Static Pressure Direct Drive Forward Curve Polypropylene Blower - This unit designed to exhaust gases from corrosive environments, this fan is primarily used in chemical cabinets, water treatment, scrubbers, chemical plants, industrial exhaust and other applications.


Also available in XPFC * CIP corrosion-resistant with carbon Impregnated polypropylene for explosive atmosphere applications.

How to Choose a Fan Model-Pole

Steps and Basic Requirements:

  • Phase - single or three
  • Static Pressure in In WG (inches of water)
  • Flow in CFM (Cubic Feet Per Minute)

*Explosion resistance or XPFC -CIP (Explosion Resistance - Carbon Impregnated)

1. Static Pressure: Locate the required or estimated static pressure in InWG (Inches of Water) on the selected series performance chart. If none has been specified it always a good rule to use a minimum of 0.25

2. Flow: Find the desired flow rate in CFM (Cubic Feet per Minute) on the selected series performance chart.  Note: For balancing, use a damper for single-phase, and a damper or VFD for three-phase

3. Locate the Fan Model: The model is listed in bold above the performance curve line where the static pressure and flow rate intersect.  

Example:

A Static Pressure of 1.5 InWG and a Flow of 300 CFM is MODEL = P15-2

Features

Available in single phase and 3 phase motors
This efficiently packaged all-polypropylene construction provides maximum protection against acids and corrosion.
Hindered-Amine Light Stabilizers (HALS) for increase UV resistance

Specifications

Static Pressure Range: 1.5 to 7.25 WG
Flow Range: 235 to 765 CFM
VFD Motors Option: Yes
Phase and Voltage: Single 115/230V & Three 230/460V
Inlet Diameter: 4.5"
Exhaust Diameter: 4.5”
*Within reason, a reducer or coupler may be utilized to adapt to smaller or larger size
Noise Level A: RPM 1435=75dB, RPM 1720=78db, RPM 2870=89, RPM 3440=93

Documentation

Specs Sheet, https://cdn.shopify.com/s/files/1/0312/1912/2316/files/STORM14.pdf?v=1633713246