Brand: Plastec Ventilation

Product Code: J30SS4P150

Availability:In stock

$4,012.29 3,562.29

Available Options

  • Best Wholesale Price
  • Factory Authorized Retailer
  • Fast Support
Jet 30 - This nicely packaged low noise unit as low at 77dB comes with an integrated weather hood, drain plug and a disconnect. Easy to install and is roof or wall mounted. Common applications are fume cabinet exhaust, water treatment, tank exhausts, and marine and salty environments as well as others. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance.

Static Pressure Range: 0.75 to 3 WG
Flow Range: 1000 to 1800 CFM
Phase and Voltage: Single 115/230V & Three 230/460V
Sound Level (A): RPM 1150=77dB, RPM 1725-88dB
TEFC Motor Option: Yes
Inlet/outlet Diameter: 10" (2x 10.75” transitions provide)
Drain Plug: Yes
Mounting Options: Roof, Wall, Vertical, Horizontal
*Within reason, a reducer or coupler may be utilized to adapt to smaller or larger size

Steps and Basic Requirements:

  • Phase - single or three
  • Static Pressure in In WG (inches of water)
  • Flow in CFM (Cubic Feet Per Minute)

*Explosion resistance or XPFC -CIP (Explosion Resistance - Carbon Impregnated)

1. Static Pressure: Locate the required or estimated static pressure in InWG (Inches of Water) on the selected series performance chart. If none has been specified it always a good rule to use a minimum of 0.25

2. Flow: Find the desired flow rate in CFM (Cubic Feet per Minute) on the selected series performance chart.  Note: For balancing, use a damper for single-phase, and a damper or VFD for three-phase

3. Locate the Fan Model: The model is listed in bold above the performance curve line where the static pressure and flow rate intersect.  

Example:

A Static Pressure of 1.5 InWG and a Flow of 300 CFM is MODEL = P15-2